T-8000A Full Color Led Controller

T-8000A-TTLystem features1. 32—256 Gray level,Support software Gamma correction.2. Support the rules and special-shaped handle.3. Eight--port output,every port can support 512-1024 pixels.4. Off-line (SD Card) control, can be multiple controllers used in combination, play back content stored in the SD card.5.T-8000A-TTL store a maximum of 16 programs,copy multiple files to the SD card in order,after formatting the SD card as "FAT" format.6. The program must be named in orders ,just as ：00_1.led, 01_1.led, 02_1.led.7. Compatible with single and dual ICs, if you control a single line IC LED lights, without being connected to the CLK line.8. New T-8000A-TTL have a screen, the controller can be encrypted to limit the times of use.NOTE：1.When T-8000A--TTL controller control less than 512 lamps the frame rate can reach 30fps. When T-8000A-TTL controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.2.Support chips：Chip type Software code& Controller type Pixels/(MAX) Note LPD6803,D705,1101,6909, 6912T-8000-68038192 LPD8806,LPD8809T-8000-88068192 TM1803,TM1804,TM1809,TM1812T-8000-TM8192TM1804 and TM1809 are divided into high speed and low speedTM1903,TM1904,TM1909,TM1912T-8000-TM198192 UCS6909,UCS6912,UCS7009,UCS5903T-8000-UCS-328192 UCS1903,UCS1909,UCS1912T-8000-UCS-2568192divided into high speed and low speedUCS3903T-8000-UCS-10248192 DMX512T-8000-DMX1360/4096Compatible with standard DMX512WS2801,WS2803T-8000-WS8192 WS2811T-8000-WS28118192divided into high speed and low speedDS189T-8000-DS1898192 TLS3001,TLS3002,TLS3008T-8000-TLS____ P9813T-8000-P98138192 SM16715T-8000-SM167158192divided into high speed and low speedSM16716T-8000-SM167168192 BS0901,BS0902T-8000-09018192 BS0815T-8000-081581923.The meaning of flagButton Meaning SET Save your adjust MODE Switch effect file SPEED+ Turn up speedPress the speed adjustment button the file will in turn play. SPEED- Turn down                    DC 5VDC 5V                    POWERPower light                    ERRORError indicator                   SD CARDSD card slotCLK Clock line DAT Data line GND Ground wire NOTE：For the TTL(SPI) signal, the controller signal ground must connect to the LED ground wire directly.4. Mode of connection6.File saving： Rules for naming files（Use of multiple controllers at the same time）：The name of the file on the first controller   "00_1.led" ---------the first effect file  "01_1.led" ---------the second effect file  "02_1.led" ---------the third effect file  ……    "15_1.led" ---------the fifteenth effect file The name of the file on the second controller：  "00_1.led" ---------the first effect file  "01_1.led" ---------the second effect file  "02_1.led" ---------the third effect file  ……    "15_1.led" ---------the fifteenth effect file  ………For example   7. Specific parameters:  Memory card：  type：SD card（suggest using high-speed SD card）  Capacity：128MB—2GB  Format：FAT  Store file Format：*.led Physical parameters：          Working temperature ：-30℃ —85℃  Working voltage：DC5V  Working power：3W  Size：L200mm×W170mm×H50mm  Weight：1.5KG  Signal port：3pin connect portNOTE：Before copy files to SD card ,The SD card must be formatted as FAT format.